The best way to maintain a sprinkler system is to first understand how it works. If you want to learn how a sprinkler system works, then read on. You can save a lot of water and energy.

Different Terms Used For Sprinkler Controller Components

The sprinkler system is made of various parts that work together. It is important that you know their terminologies and purpose. As a sprinkler system owner, it also becomes easy to shop for these components, since you will have an idea of what you are looking for. Here are some of the basic parts of and their roles:

1、Valve

The valve is the simplest part that you can learn. The valve is small in terms of size and weighs less than a kilo. However, despite its size it plays a significant role in the irrigation system. The role of the valves is to respond to signals that are made by the timer. These signals are the ones that cause the valve to either open or close.

2、Station

The station’s purpose is to receive water. However, this takes part when the valves are being controlled, otherwise the water does not fill this unit. Each station corresponds to each valve. However, when watering a large area, a station can be set to correspond to more than two valves. The station is also referred to as the zone.

3、Program

Every sprinkler needs a program in order to control the stations. Modern units possess three programs, simply named as program A, B and C. These programs gives you the privilege of choosing where you want to water. Each program can be set to water a different section of your lawn.

Sprinkler Controller Features

After understanding different terminologies, you can now proceed on to learning some of the basic features of a controller. Programming an irrigation system timer for yourself is not an easy task. However, the manual guide included with your product will give you directions on how to use these features.

The first feature is the start time, which gives you the privilege of specifying when the sprinkler should work. Runtime is the second element found in an irrigation controller, and its role is to determine how long a valve remains open. Run is another interesting feature that most homeowner use, because the sprinkler system works according to how you have set your programs.
The semi-auto feature is a new feature found in newer models. Simply choose the program that you want to run on semi auto, whenever you want. You can use the semi auto feature when you want all the sections of your lawn to receive the same amount of water. However, the old sprinklers may not have this feature but you can achieve the same functionality using the manual feature.

how does a sprinkler system work

After understanding different terminologies, you can now proceed on to learning some of the basic features of a controller. Programming an irrigation system timer for yourself is not an easy task. However, the manual guide included with your product will give you directions on how to use these features.

The first feature is the start time, which gives you the privilege of specifying when the sprinkler should work. Runtime is the second element found in an irrigation controller, and its role is to determine how long a valve remains open. Run is another interesting feature that most homeowner use, because the sprinkler system works according to how you have set your programs.
The semi-auto feature is a new feature found in newer models. Simply choose the program that you want to run on semi auto, whenever you want. You can use the semi auto feature when you want all the sections of your lawn to receive the same amount of water. However, the old sprinklers may not have this feature but you can achieve the same functionality using the manual feature.